Has anyone ever fit coilovers on a T3? |
Post Reply | Page 12> |
Author | |
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
Posted: 18 Jun 09 at 00:12 |
One step ahead there, something I have mulled over with my engineer.
I just need to work out how much to shim, and there would also have to be some wedge shaped washers to go with the longer bolts so that they sit square.
initially I think I may just be gask and trial it with washers and see what it takes to get the camber and tracking right, then transfer to drawings and make some shims.
I don't fancy machining the arms.
Without adjusting the tracking, well, should I say the tracking at the rear is at 5mm toe in at full adjustment!
Scary really.
|
|
TransPorscher
Vanorak Joined: 21 Dec 04 Location: South West UK Status: Offline Points: 1350 |
Post Options
Thanks(0)
|
Don't know if he's on this forum but someone I spoke to recently has made some wedge shaped shims to fit between the rear bearing housing and trailing arms.Apparently whilst his van was in a Subaru conversion place they copied them! Not RJ by the way !! Another way a German friend has done it was to machine the trailing arm on the face where the bearing housing mounts. |
|
Charlie
Small Moves Big Grooves! WeFunkRadio.com |
|
TransPorscher
Vanorak Joined: 21 Dec 04 Location: South West UK Status: Offline Points: 1350 |
Post Options
Thanks(0)
|
I've always said there's a lot of people who want really low suspension and really big wheels/skinny tyres.These people are more interested in wanking over their vehicles park in a field at shows than driving and using them for their intended purpose. Stationary looks or comfortable driving !!
|
|
Charlie
Small Moves Big Grooves! WeFunkRadio.com |
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
When the vans were made in the factory, the body is lowered onto the floor pan.
See the factory vids on YouTube, or Yahoo or wherever they are, anyway, you can quite clearly see that the drop an almost complete body onto the floor pan assembly.
If you are serious about building a low van I would be tempted to strip a van and unpick where the factory did it, then modify and drop back on, that way you get the looks and a van that actually has some suspension and a ride that won't make your dentist or chirpractor rub his hands together.
or, you can hack your springs, have it ride like a bag of shit, chew tyres and be generally not a nice thing to drive, or safe for that matter, but hey, you'll look "cool", whatever that is.
Just go to VZI if you want to see dangerously modified vehicles that are made to handle worse in the name of "cool"
....search for narrowed beam and all will be revealed!!
|
|
hege
Not Quite Newbie Joined: 26 Oct 07 Location: Finland Status: Offline Points: 24 |
Post Options
Thanks(0)
|
We've already got a limited slip. Spinning both rear wheels helps, but doesn't solve the the problem you get with wrong suspension geometry. The car just doesn't feel like it has traction like it should when accelerating.
Like Baxter mentioned, if you want to go serious about lowering your vehicle, you should consider lowering the body on the chassis. We'll be getting a spare parts car to our garage in the next few weeks, and we've been thinking of using it as the practice car for the operation. In a T3 it's quite straight forward to lower it because you just cut like hell to make room, then cut the frame and then lower and strenghten it. I'm not saying it isn't a lot of work, but trying to do the same thing on a 911 or other car without frame structure you'll have a much harder time getting the strenght and stiffness into the suspension if you do the same thing. We would also want to alter the front lower wishbone mounting points a bit to get some anti-dive into the geometry. Our car is as low as the car above at the moment. With shoes on you can barely get your toes under the plastic front spoiler. I'll have to take some pictures... |
|
www.ratataksi.com
|
|
Lewis
Groupie Joined: 05 Mar 08 Location: United Kingdom Status: Offline Points: 75 |
Post Options
Thanks(0)
|
How about this van - looks sick! Anyone know what springs these are?
|
|
green manalishi
Groupie Joined: 22 Sep 08 Location: Blackdown Hills Status: Offline Points: 120 |
Post Options
Thanks(0)
|
Here is my set-up
Only joking, seen on an American forum, with modified top hat joints. |
|
1991 2.1 DJ 16" Factory Hightop camper
|
|
Ghia
Vanorak Nesh Joined: 04 Mar 05 Location: Banbury Status: Offline Points: 2889 |
Post Options
Thanks(0)
|
Lewis,
This was my Bluestar lowered using H&R Cup kit. That's H&R 55mm springs and Koni adjustable shocks. It worked well and even with 18's, it was good to drive and not too hard.
There isn't much more in a Bluestar than your van. Your tyres as a little smaller O/D than the Bluestar setup above so you'll end up with a little more gap between the tyre and arch.
One way around getting the power down (which you have plenty of in your van) is to use an LSD in the gearbox.
MG
|
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Yep, when you lower the rear you get a load of toe in and negative camber.
I have rectified mine by elongating the mounting holes for the rear arm, but I'm already out of adjustment and it's still not 100%, but I daren't elongate any more so I'm looking into other ways of sorting it.
With AVO -50mm springs, on the rear, with as much elongation as I dare I'm still running .5° negative camber.
|
|
hege
Not Quite Newbie Joined: 26 Oct 07 Location: Finland Status: Offline Points: 24 |
Post Options
Thanks(0)
|
The rear is also a problem. When the trailing arm is at an angle, you'll have problem putting power down. The trailing arm should be level or point just a bit upwards to the front, it should not be the way it is when the rear is lowered.
|
|
www.ratataksi.com
|
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
H&R's.
Trouble with your van is that it's empty so whatever you put in it is not going to be as low as you want.
Also remember the lower they go the worse they ride.
|
|
Lewis
Groupie Joined: 05 Mar 08 Location: United Kingdom Status: Offline Points: 75 |
Post Options
Thanks(0)
|
It does seem to be a lot of work to achieve that even with air ride - the handy thing with air though is you can raise it up for driving it then just have it 'slammed' when parked up etc.
Bax all I really am after is some springs that sit lower than the Weitec one's as I think they make it sit a bit high at the moment Do you have any which may sit lower than mine? |
|
Baxter
Admin Group Scruff Daddy Joined: 29 May 04 Location: Huddersfield Status: Offline Points: 8060 |
Post Options
Thanks(0)
|
Seems like an awful lot of work for little in return.
The problem for lowering the van at the front is achieving camber angles that can be set and probably custom fabrication of the upper wishbone or removal of the seat box for clearance for the arm.
Plus, lowered that much the suspension is operating in an area where it wasn't designed to operate, so more stress on parts and weird angles, so if it does work, it won't be pretty and will probably be all over the shop (just imagine the angle the lower arm will sit at, well over centre and well out of it's "comfort zone")
Fundamentally, it depends on what you want it for, to be able to use it, or driving around the track.
If you want serious lowering I would be looking towards lowering the body on the chassis as I think the end result would be better,and it will still retain some form of driveability rather than serious lowering that will just end up in bump steer central.
|
|
hege
Not Quite Newbie Joined: 26 Oct 07 Location: Finland Status: Offline Points: 24 |
Post Options
Thanks(0)
|
There's some vans that have air bags fitted to them. Depends on what you think is an easy fit. I haven't seen all solutions done to T3's, but I consider them as easy to fit as coilovers.
The front is bit of a problem because there isn't much space to fit an conventional air bag if you want to keep the shock at stock location. http://www.thesamba.com/vw/forum/viewtopic.php?t=325077&highlight=air+bags http://forums.vwvortex.com/zerothread?id=3130296 http://forums.vwvortex.com/zerothread?id=4326441 |
|
www.ratataksi.com
|
|
Lewis
Groupie Joined: 05 Mar 08 Location: United Kingdom Status: Offline Points: 75 |
Post Options
Thanks(0)
|
Hedge - thanks for the reply. You have the coolest T3 I have EVER seen - love it! I will look into it then, failing that, what about airbags? Are they easy to fit on these vans or has anyone ever done it?
|
|
hege
Not Quite Newbie Joined: 26 Oct 07 Location: Finland Status: Offline Points: 24 |
Post Options
Thanks(0)
|
The pics are from our white Transporter. I calculated the springs, but didn't have values for the stock or h&r springs as basis so I had to do it from scratch by measuring the suspension geometry and suspension motion ratios.
At the moment we're running 550lbs front springs and 400 lbs rear's. But I don't think this will help anyone who wants to make a street car. We'll go stiffer at the front as soon as we can find a good source for springs. The suspension tuning will start when we get the package mechanically reliable. Blowing up two subie sti engines in two weeks takes time away from everything else...
You are right about the rear. At the rear the bump stop is separate as is the spring. If you mount the coilover in the place of the damper you should reinforce the frame because I'm sure it will bend if you hit a pot hole with a loaded van. The trailing arm should also be reinforced. It helps if you build a roll cage that mounts close to the coil over mounts. The front damper has bump stops as stock. If the upper (and lower) stock damper mounts are designed to take the load of a fully loaded van in extreme situations, then it's good enough for me. It will require work to find someone who supplies the right coilovers or you'd have to have them manufactured to your size and mounting. I have seen units that have looked like they could be a direct fit that were made by Bilstein, so they should be around. Other manufacturers probably also make units that fit. Cost will be quite high if you need to build them custom. We we're quoted 500 Euro a piece for Custom lenght (race spec) Bilsteins when I asked around. -Henrik |
|
www.ratataksi.com
|
|
busbuddy
Vanorak Joined: 22 Jul 06 Location: Leicester Status: Offline Points: 2068 |
Post Options
Thanks(0)
|
most specialists like avo have a huge selection springs of various poundage so I doubt you will need some made special, we have loads of sets for our zephyr
to be honest if you are gonna fabricate mounts properly and buy coilovers then it would cost less to bag it
|
|
Ghia
Vanorak Nesh Joined: 04 Mar 05 Location: Banbury Status: Offline Points: 2889 |
Post Options
Thanks(0)
|
I don't have links sorry. Someone on here might. There have been numerous pics of their vans at shows... put in a search for Porsche powered or 997 powered bus or something like.
Rather than trying to work out what they might be, I'd take a stock spring to them and they should be able to measure it and then ask to uprate it (maybe 25%) a bit.
There are companies out there who do one off coil overs giving different lengths etc.
MG
|
|
Lewis
Groupie Joined: 05 Mar 08 Location: United Kingdom Status: Offline Points: 75 |
Post Options
Thanks(0)
|
Ok guys cheers.
Mike, do you have any link to any of these lad's buses at all? I reckon it might not be too hard to work out srping poundages, I guess it would just be a case of working out the weigth of the van and then speaking to somewhere like Faulkners (who make custom springs) and getting them make some suitable one's up. What do you reckon? |
|
Ghia
Vanorak Nesh Joined: 04 Mar 05 Location: Banbury Status: Offline Points: 2889 |
Post Options
Thanks(0)
|
Lewis,
You can go lower than you have atm by using H&R 55mm springs.
I've looked into fitting coil overs. It's not a big problem to do but as no one has any info on what spring rating to start at etc, it would be a steep learning curve.
You would need to start looking at what lengths (eye to eye or eye to bottom of mounting pin) the shocks need to be and then try to find out what the stock T3 spring rating is and go from there.
The chaps from wales who are running porsche and subaru engines are running coil overs but they have done everything from scratch and run helper springs as well.
MG
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |