Print Page | Close Window

LT1 71 mm Brake Servo Pushrod

Printed From: The Brick-yard
Category: LT, Crafter & Sprinter Section
Forum Name: LT1 chat
Forum Description: Chat forum for LT1
URL: http://www.brick-yard.co.uk/forum/forum_posts.asp?TID=94049
Printed Date: 15 Jan 21 at 15:06
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: LT1 71 mm Brake Servo Pushrod
Posted By: 1994LT35MINIBUSCAMP
Subject: LT1 71 mm Brake Servo Pushrod
Date Posted: 12 May 19 at 15:02
Hi folks

Got that annoying tap tap that comes and goes from the top end and suspect it may be the brake servo pushrod. Pulled mine off and it looks ok still shiny on face both ends but black worn through to shiny on sides at both ends so I suspect it's been reversed before. My pan is to just replace it but it's 71 mm. All the replacements I see are 67.5mm including brickwerks. Does anyone know where I can get the 71 mm pushrod, or do I replace with a 67.5 mm together with a new servo pump. Happy to be pointed to a previous post.


Thanks Michael

-------------
Michael



Replies:
Posted By: 1994LT35MINIBUSCAMP
Date Posted: 17 May 19 at 21:00
Hi got help on this from other breezeblocker Brickwerks do a 71mm its part no 075145307. Hopefully a bit quitter now

-------------
Michael



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net